Hot Oil Transfer Pump/Centrifugal Oil Pump

• Customization: Available
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Model NO.: RY125-100-200
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Casting Material: Cast Steel /Stainless Steel
• Revolution: 2900rpm/1450rpm
• Max Temperature: 350 Degree
• Discharge Pressure: 0.15-0.8 MPa
• Transport Package: Polywood Case
• Specification: RY
• Trademark: ShengZhe
• Origin: China
• HS Code: 8413701010
• Production Capacity: 5000 Sets /Year

Product Description

Our Advantages:

High quality !-----------   Reduce the later maintenance trouble !
Reasonable price! ----  Use cost-effective pump, save money.
Good service! ----------- Reply Timely , Sufficient supply, Delivery time short 
Any questions can discuss with us at time. Try our best to help you. Not only pumps, other products also can help you find what you need.

Brief Introduction:

RY type hot oil pump adopts the self-heat-radiating structure, change the traditional water cooling structure, make it more simple, small volume, economy operation cost, good performance, reliable operation, it is the second generation product based on our country digesting and absorbing foreign technology.

Structure Characteristics:

1. Basic structure is single stage single suction cantilever feet support, pump suction is axial inhaled, discharge center vertical, and installed in a same base with motor.

2. Pump supported by double ball bearing, front end lubricated by lubricating oil, back end lubricated by grease, a guide tubing in the middle, to observe the conditions of sealing at any time and recovery of heat conduction oil.

3. Hot oil pump shaft seal
(1) With the combination of packing seal and mechanical seal, packing seal use high temperature resistant packing, has the good thermal adaptability, while mechanical seal adopts high mechanical strength and wear resistance, good hard alloy material, which guarantees the sealing performance under high temperature conditions.
(2) Adopts imported polyethylene (PTFE) as lip shape seal, make the sealing performance much better, seal reliability of 25 times than rubber seal, and with very strong corrosion-resist ability.

Application:

1. oil and chemical industry
2.  the oil industry
3. synthetic fiber industry
4. textile printing and dyeing industry
5. plastic and rubber industry
6. paper-making industry,
7. wood industry
8. the construction industry
9. In addition, RY series of heat conduction oil pump in mechanical industry, food industry,           pharmaceutical production, hot oil furnace oil circulation system, hot oil heating cycle is widely used in the system.RY heat conduction oil pump suitable for:

Parameters: 
 

Model	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Power (KW)		Eff. n%	NPSH (m)
				Shaft	Motor
26-20-100	4.5	15	2825	0.45	0.75	40	0.8
50-32-150	8	22	2840	1.0	1.5	42	1.6
50-32-160	10	25	2840	1.5	2.2	42	1.8
65-40-160	12.5	25	2880	2.5	3	45	2.2
50-50-170	12.5	32	2890	3.2	4	45	2.5
50-50-150	24	18	2890	3.1	4	46	1.8
65-40-190	18	40	2890	4.5	5.5	52	2.8
65-50-180	32	32	2900	4.5	5.5	52	2.7
65-50-170	40	25	2900	4.5	5.5	52	2.7
65-50-150	52	16	2900	4.2	5.5	52	2.8
65-40-200	25	50	2900	6.7	7.5	63	3.1
80-50-180	40	40	2900	6.7	7.5	63	3.1
80-50-170	60	20	2900	6.7	7.5	63	3.1
100-65-190	60	38	2930	9.2	11	68	3.5
100-65-200	80	40	2930	12.5	15	70	3.5
100-65-220	58	50	2930	12.5	15	68	3.5
100-65-210	90	45	2930	15.7	18.5	70	3.6
100-65-230	58	60	2930	15.5	18.5	62	3.5
100-65-230	100	55	2940	19.5	22	70	3.6
125-100-190	155	30	2930	17.6	22	72	3.8
100-65-240	100	70	2950	25.5	30	69.8	4.1
100-65-257	100	80	2950	32.5	37	67	3.6
125-100-220	160	45	2950	25.5	37	75	3.6
125-80-250	160	60	2970	35.5	45	74	5
125-80-270	150	85	2970	46	55	73	5
125-100-250	200	60	2970	42.8	55	76.8	6
125-100-257	260	70	2970	64.3	75	77	6.8
125-100-265	200	80	2970	59	75	74	6
125-100-245	300	55	2970	61	75	74	7.5
125-100-260	300	70	2970	75.3	90	78.2	8
125-100-270	220	85	2970	68	90	76	6
125-100-280	260	85	2970	75	90	76	6.8
150-125-250	350	60	2970	75.2	90	76	8.6
150-125-240	400	50	2970	72	90	76	9.8
150-125-270	340	76	2970	89.5	110	78.6	8.5
150-125-250	400	60	2970	88	110	74	9.8
150-125-280	400	78	2970	106	132	80.6	9.8
150-125-280	370	85	2970	106	132	80	9.7
250-200-500	500	80	1480	136	160	76	5
300-250-500	600	80	1480	158	185	70	9
250-200-550	700	80	1480	190	220	81	14

FAQ: 
1. What is your payment terms?
    Normally 30% TT in advance,  we will send you pictures when finish the production,  balance 70%          should be paid before delivery. 
    If the total amount is small, and delivery time is short or have stock,  had better pay 100% TT once, it      will reduce the procedure fee and easy to operation.

2. What is the delivery terms?
    EXW, FOB, CFR, CIF, you could choose any one which is convenient for you.

3. How about the delivery time? 
    Usually it takes 7-10 working days after your advance payment arrive. The exact delivery time                 depends on the items and the quantity of your order.

4. Do you test all the goods before delivery? 
   Of course, we have 100% tested before delivery.

5.Could you supply sample?
   We are glad to send sample for your testing, but the cost should be paid by customers.

6. Can you produce according to customer's sample and drawing?
    No problem, it can be customized according to customer's request, we supply OEM service if quantity is good.

7.What is the warranty time?
   Our warranty time is 1 year normally. 

8. Can we visit your company?
    welcome to come to China and visit our company, please kindly inform us before your visit, thanks